1. If the sheet machine is put into use for the first time, when turning on the machine, we should first heat the machine for about 40 or 50 minutes. The recommended operation method is to pull the V-belts of the motor by hand until they are free; continuously pull 8-10 times according to the normal working direction, then continue to heat for about 10 minutes, and then start, but due to the need for continuous supplementary heat for normal production, the heating should be continued. ; Adjust different temperatures according to the different properties of plastics.

2. When working, it is necessary to ensure the temperature of the machine, not high and low.

3. The feeding of the sheet extruder should be uniform and add enough material. The feed rate and feed rate of the sheet extruder would otherwise affect pellet quality and yield.

4. The power supply of the sheet machine should be completely cut off when it is stopped.